| | | INSTRUCTIONS FOR MOBILES & LAPTOPS | |
Step 1: CLEAN DEVICE
Find a flat, well-lit surface.
Then clean your device
with a clean cloth.
|
| STEP 2: REMOVE "CHIPKADE SKIN"
To avoid stretching, slowly and
carefully remove your
"CHIPKADE SKIN" from the
backing paper.
|
| STEP 3: APPLY "CHIPKADE SKIN"
Apply your "CHIPKADE SKIN" to
the device, aligning all edges and
cut-outs, such as button and
speaker holes. |
| INSTRUCTIONS FOR WALL ART | |
STEP 1: CLEAN YOUR SURFACE
Wipe your walls down with a smooth & dry cloth.
Remove any dust and ensure surface is plain, smooth and residue free.
|
| STEP 2: PLAN YOUR DESIGN
As per size of wall art, select and measure area where design is to be
placed . Mark the top outline dimension by placing dots on either corner
of the margin . Ensure the wall art is aligned in a straight line. Incase wall
art is of size more than 1.5ft x2ft use two person to place the wall art
|
| STEP 3: STICKING OF WALL ART
Using both hand, place the top end of the printed vinyl on the left & right
corner of the marked area . Start from one corner and slowly peel away
the backing paper with a rolling action.
|
| STEP 4: METHOD TO PASTE
Slowly roll down the backing paper and simultaneously smoothen the
printed Vinyl Graphics with the help of soft cloth , starting from the
center & move outwards to avoid air bubbles and wrinkles. Press & rub
firmly as you paste the picture . while pasting , ensure the vinyl is not
forcibly stretched as it will deform the printed graphics.
| | Ready for a New Look!! |
|
